Skip to main content
Version: 2.6

SNMP

The [Settings > General > Integrations > SNMP] menu can be used to configure SNMP protocol parameters.

image-20231116085639702

In this menu there are the following components:

  • SNMP switch - to enable or disable the SNMP server.

  • Client subnet section where you can configure SNMP clients

    • Address with Netmask - client IP address witch netmask
    • Community String - SNMP community String

  • Save button - only after pressing this key the configuration will be saved.

You can add multiple SNMP clients by pressing the plus key in the upper right corner of the Client subnet section.

image-20231116090059715